Your watch can get damaged from harsh falls or drop and you want to get it repaired. But every damage might not demand expert help. Before going to a mechanical watch technician or horologist, check first to see How to Fix a Watch that stopped Ticking or if you can fix the problem or not. There might be a simple repair that you can perform and save the cost that the technician would have charged. Most often these repairs require only a few basic tools available in your home itself. A pocket watch, for instance, will be fastened to the wearer, maybe to a waistcoat, with a chain called an Albert chain linked to the pendant.
Contents
Wristband Repairing
If there is any damage to the wristband, consider replacing it. And if it has a different section, remove only the broken parts using a small screwdriver.
In the case of whole wristband replacement, the process is very simple. Remove the retractable pins and insert the new ones with the same pins. Push the pins tightly and tighten the connection. And if you need to replace only a few sections of the whole wristband, insert the new parts where you removed the broken section.
There should be small hooks to connect. Screw them using fine pliers. That’s it. Your watch should now look as good as a new one.
Fix the Loose Hands
Sometimes, the hour, minute, and second hands become loose ( dial ) because of repeated drops. If you need to tighten these hands, the first thing is to remove the back of the watch. For this task, you will need a small flathead screwdriver. Lift the cover with the help of the screwdriver.
Then remove the watch movement and the crown very carefully. Make sure any small part doesn’t get lost or damaged. Then put the hands, crown, and watch movement back into place. Now put the back cover and screw it properly. If there are any scratches in the crystal, use a soft sponge to wipe them out.
Do the job with little pressure. This would lessen, or remove the scratch mark.
Replace Broken Crystal
If the crystal of your wristwatch is broken and you want to replace it, try to find the same one. And if the exact material is not found, find a similar shaped one made from a different material. Now remove the back cover of the watch to take out the broken crystal.
After removing the back cover, remove the watch movement casing and also the crown. Then gently take the broken crystal out of the bezel with tweezers. Now insert the new crystal and put back all the parts carefully. With this, your job is done.
Change the Battery
If your watch is a digital or automatic watch and not showing the correct time, it may require changing the battery. These batteries are available in watch stores or even departmental stores. Just take out the old battery and insert the new one in place. Adjust the timepiece as needed. Observe if the watch is showing the correct timekeeping or not.
Replace the Damaged Buttons
After several years of use or repeated drops, the knobs or buttons of a watch may get damaged or broken. If the exact replacement button is available, it would be best. For replacement buttons, contact your manufacturer.
If they are producing the same model, you should find the replacement parts from them. Unscrew the damaged buttons and insert the new ones. Press them gently to align with the corresponding particles.
Fix the Timer
If your watch displays some problems associated with the timer or alarm, it might have resulted from a loose knob or control button. Simply tightening might solve the problem. Or else, you might need to dismantle the parts. After that, reassemble all of the parts.
However, this watch repair guide should help you to fix some common problems you might face with your wristwatch. If you are not that much experienced and the problem seems major, leaving that to a qualified watch technician would be the wise option.
FAQs
1. Can a Damaged Watch be Repaired?
How to Fix a Watch that stopped Ticking? Yes, a damaged watch can be repaired in most cases. In any case, the sort and degree of harm will decide if a watch can be fixed or not.
For instance, if the watch’s valuable stone or glass is chipped or cracked, it may very easily be replaced with a different one. Additionally, if the watch strap or arm band is damaged or broken, it may be replaced.
If the watch is not working or keeping accurate time, it may require a more complex repair. This could involve replacing the battery, fixing the watch movement, or replacing parts that have worn out or been damaged.
It is critical to take your harmed watch to an expert watch mechanics shop or watchmaker for assessment and fix. Attempting to repair a watch yourself or taking it to an inexperienced repair shop can cause more damage and make the repair more difficult or impossible.
Also, some watches might be more challenging to fix than others. For example, vintage or antique watches may require special expertise and parts that are no longer available. At times, it very well might be more practical to supplant the watch as opposed to fix it.
In conclusion, a damaged watch can usually be repaired, but it depends on the extent and type of damage. It is ideal to take your watch to an expert mechanics look for assessment and fix. Here are a few things you can do to attempt to get it ticking once more: Wind your watch: On the off chance that your watch is a mechanical watch, it might have halted in light of the fact that it should be wound.
2. How to Fix a Watch that stopped Ticking again?
There could be several reasons why your watch has stopped ticking. Here are a few things you can do to attempt to get it ticking once more:
- Wind your watch: On the off chance that your watch is a mechanical watch, it might have halted on the grounds that it should be wound. Try winding the watch using the crown (the small knob on the side of the watch) and see if it starts ticking again.
- Replace the battery: If your watch is a quartz watches, it may have stopped because the battery needs to be replaced. Take your watch to an expert watch mechanics shop or watchmaker and have them substitute the battery for you.
- Check the settings: Your watch may have stopped because one of its additional features, such a stopwatch or alarm, was activated. Check your watch’s settings and disable any features that could be the source of the problem.
- Take it for servicing: If your watch has stopped ticking despite trying the above steps, it may need servicing. Bring your watch to a reputable watchmaker or repair shop so they may examine it and make any required repairs.
It’s crucial to remember that repairing your watch yourself might result in greater harm, so it’s better to have a professional do the job. Additionally, regular servicing and maintenance of your watch can help prevent it from stopping in the future.
3. What is the Best way to fix a Broken Wristwatch?
How to Fix a Watch that stopped Ticking depends on the type and extent of the damage. Here are some steps you can take to fix a broken Wrist watch:
- Determine the problem: Identity what exactly is broken in your watch. Is the crystal or glass cracked or scratched? Is the strap or bracelet broken? Is the watch not keeping time or not working at all? You can choose the best course of action by being aware of the issue.
- Take it to a professional: On the off chance that your watch is costly, complex, or has critical harm, it is fitting to take it to an expert watch fix office or watchmaker.
- Replace parts: If your watch crystal or glass is cracked or scratched, it can be replaced with a new one. Similar to this, a new watch strap or bracelet can be added if the old one breaks. A professional can replace these parts for you.
- Repair the watch movement: If your watch is not working or not keeping an accurate timepiece, it may need to be serviced. This could involve replacing the battery, fixing the watch movement, or replacing parts that have worn out or been damaged.
- Regular maintenance: To prevent future damage or problems with your Wrist watch, it’s essential to take good care of it. Regular care, such as lubricating and cleaning the watch movement, can help your watch last longer.
It’s important to note that attempting to repair your watch yourself can cause further damage. It’s best to take it to a professional for repairs, especially if your watch is valuable or has sentimental value.
Related Articles:
5 Best Peugeot Watches Review | An Exclusive Buying Guide
Know Different Types of Watches to Make a Precise Selection
